Advertisement
03-7. Cleaning flux from PC board
Cleaning this product is not needed.
If cleaning it, pay attention to the following points to prevent the negative effect to
the product.
(1) To increase the cleanliness of the cleaning fluid and cleaning operations, prepare
equipment for cleaning process beginning with boil cleaning, ultrasonic cleaning,
and then vapor cleaning.
(2) Carefully oversee the cleanliness of the cleaning fluids to make sure that the
contact surfaces do not become dirty from the cleaning fluid itself.
(3) Since some powerful cleaning solutions may dissolve molded components of the
connector and wipe off or discolor printed letters, we recommend semi-aqueous
cleaning solvent. Please consult us if you wish to use other types of cleaning
fluids.
(4) Please note that the surfaces of molded parts may whiten when cleaned with
alcohol.
Panasonic Corporation
industrial.panasonic.com/ac/e/
Operation manual for Narrow pitch connectors P5K
©
- 18 -
Panasonic Corporation 2017
ACCTF29E-1 201708
Advertisement
