REPLACEMENTS
1.2.2. Replacement of the rear wheel
Code No. 4512 133 0418.
Note
If one rear wheel is defective, check and ensure the
good condition of the other one.
S Remove the brake. Refer to chapter 1.2.1
"Replacement of the longitudinal brake".
S Lift the floor carriage some millimeters so that the
rear wheel runs free.
S Fix the position, for instance, with a wooden
bar (1).
S Remove the screw M6 (2) with an Allen key.
Note
Keep in mind the order of the distance rings on the
mandrel.
S Remove the mandrel (1).
S Remove the wheel (2).
S Place the distance rings in correct order and the
new wheel on the mandrel.
S Insert the mandrel and fix it.
Note
Ensure that the order of the distance plates of the brakes
is correct.
S Install the brake according to chapter 1.2.1
"Replacement of the longitudinal brake".
S Install the anchor rail.
S Re-install the covers.
S Check the functions.
BuckyDiagnost FS IsoRAD
4_Replacements_mit_12NC_04
Replacement of the rear wheel
1.5 h
2
1
2
(04.0)
E
2004 Philips Medical Systems
ALL RIGHTS RESERVED
BuckyDiagnost FS IsoRAD
1
4--3