Related Manuals for Artus 701ES
Summary of Contents for Artus 701ES
- Page 1 User’s Manual ARTUS-701ES Safety precautions are intended to protect the user's safety and prevent property damage. Please read the instructions before use and use them correctly.
-
Page 2: Table Of Contents
6.2 Treatment and Maintenance 6.3 Troubleshooting Chapter 7. Warranty Thank you for purchasing the Shoulder CPM(ARTUS-701ES). Please refer to the manual in the box to view the components contained within the box when opening the box. Be sure to familiarize yourself with this manual before connecting and powering down the parts, and keep the manuals handy for future use. -
Page 3: Chapter 1. Warning And Caution
Chapter 1. Warning and Caution Safety precautions are intended to be used safely and correctly to prevent accidents or risks, so please ensure that you read and protect them carefully. Cautions are divided into ‘warning ’ and ‘ caution ’, each meaning : Warning : If there is a possibility of death or serious injury to the person in violation of the instructions... -
Page 4: Caution
1.2 Caution Please do not disconnect the power or communication cables during operating. This could cause injury. Elderly people and people with disabilities should use it under supervision of product manager such as doctor or physical therapist. This could cause injury. ... -
Page 5: Information Of Electro-Magnetic Compatibility (Emc)
Warning : Do not use ARTUS-701ES near high-power wireless equipment such as mobile phone, this could cause malfunction. Caution : ARTUS-701ES is compliant with medical device regulations 93 / 42 / EEC and it is designed to protect it from electromagnetic signals. ... -
Page 6: Chapter 2. Product
So it is necessary to exercise properly for the quick recovery of surgical area. ARTUS-701ES is the rehabilitation equipment to recover the function of shoulder joint quickly through continuous passive movement. -
Page 7: Purpose Of Artus-701Es
The ARTUS-701ES should be used in a properly equipped environment such as a hospital and must be handled by trained professional who have the proper qualifications like physical therapists or medical specialists. -
Page 8: Product Configuration
2.8 Product Configuration Please check the product and accessories before installation. Hand Splint Upper Arm Splinter Body Hand Controller Power Cable 2.9 Label HC label Control box label Elbow label (Upper) Elbow label (Bottom) Base label CST. CO., LTD. -
Page 9: Component Name
2.10 Component name Main device 1. Caster 2. Rear lower assembly locking screw 3. Height adjustment part locking screw 4. Control box 5. Upper arm splinter 6. Shoulder motor 7. Upper arm splinter locking screw 8. Angle adjustment locking screw 9. -
Page 10: Product Specifications
2.11 Product specifications Division Contents Type of Protection Class I, Type B Rated Power AC 100V~240V, 50/60Hz Power Consumption 30VA Operating Temperature / Humidity +10°C ~ +40°C / 80% or less Storage Temperature 0°C ~ +60°C Atmospheric Pressure 700~1060 hPa Size 670 X 790 X 910 (Width X Length X Height) Weight... -
Page 11: Explanation Of Terms
Chapter 3. Explanation of Terms and Symbols 3.1 Explanation of Terms Term Explanation Limit angle of flexion and abduction of shoulder Upper limit Limit angle of flexion of elbow Limit angle of inner rotation of Elbow Limit angle of extension and adduction of shoulder Lower limit Limit angle of extension of elbow Limit angle of outer rotation of Elbow... -
Page 12: Chapter 4. Installation
Chapter 4. Installation Refer to clause 2.8 Product configuration. Upper arm splinter Height adjustment part Hand splinter Hand Controller Lower assembly part Step 1. Fix the lower assembly part. Step 2. Mount and fix the Height adjustment part Step 3. Mount and fix Hand splinter Step 4. -
Page 13: Chapter 5. Operation
Chapter 5. Operation Please review warning and caution in Chapter 1. Please check the connection of the power switch (cord) and the hand controller. Explanation of symbols in the control unit is covered in Chapter 3. 5.1 How to adjust the device according to the exercise Warning : Tighten the fixing screw (knob) firmly to prevent the device from separation during exercise 5.1.1 Device adjustment for Flexion/Extension... - Page 14 5.1.2 Device adjustment for Abduction/Adduction <Fig 5.1.2> Step 1. Set the Shoulder motor and hand splinter to face forward. If the lesion is the right shoulder, it should be on the right side, and if the lesion is on the left shoulder, face the left side Step 2.
- Page 15 5.1.3 Adjustment the arm length <Fig 5.1.3> Step 1. A patient is sitting comfortably in the separate chair and has his back tightly attached to the chair back Step 2. Adjust the location of Shoulder motor to the patient’s shoulder. Step 3.
-
Page 16: How To Use Hand Controller And Set The Exercise
How to use Hand Controller and set the exercise 5.2.1 Explanation of full screen <Touch and Display area> 1) Timer/Lower pause/Upper limit 2) Angle/Bypass/Manual 3) Counter/Upper pause/Lower limit 4) Up/Down arrow 5) Exercise setting 6) Speed/Uniform/Acceleration 7) Symbol of Touch Locked 8) Exercise status ... - Page 17 display exercise operating(circle of M is circulating) mode or stop mode. 5.2.2 Set the Exercise : Flexion / Extension of Shoulder : Abduction / Adduction of Shoulder 1) To set desired exercise, It must be connected shoulder motor to do exercise. The exercise of Flexion/Extension and Abduction/Adduction are available.
- Page 18 ● [Upper pause] will be displayed when touched twice the [Lower limit] display area(3), and select upper pause (time) with [Up/Down] arrow(4) when the number is flickering. ● [Lower pause] will be displayed when touched twice the [Upper limit] display area(1), and select lower pause (time) with [Up/Down] arrow(4) when the number is flickering.
- Page 19 ● It is available to select uniform or accelerative exercising speed by touching twice the [Speed] display area(5). ● The current selected mode is flickering and available to change that with [Up/Down] arrow(4). ● And then, touch the symbol [M](8) to complete setting of this. 5.2.5 Set the exercise time and the number of exercise ※...
- Page 20 <Fig 5.2.1> <Fig 5.2.2> <Fig 5.2.3> ● The [Bypass] function is used to adjust exercise range during exercise operating. ● Touch the [Angle] display area(2) in screen <Fig 5.2.1> while exercise is operating, [Bypass] is displayed like screen <Fig 5.2.2>. ●...
-
Page 21: Chapter 6. Maintenance And Troubleshooting
function is set with ‘beep’ sound and symbol displaying, above screen shows this. ● It is available to operate only [START] and [STOP] button. ● with ‘beep’ sound and symbol di The [Lock] function is disabled sappear by pressing the [STOP] button for 5 econds and holding Chapter 6. -
Page 22: Chapter 7. Warranty
The current angle of Shoulder Motor is out of programmed range of exercise. - Pressing and holding the [START] button for Error code ‘E4’ displayed more 3 seconds, then the device goes into the programmed range. The error code will disappeared. The current angle of Shoulder Motor is out of programmed range of exercise. - Page 23 ● This user’s manual cannot be changed or reproduced without prior consent of our company. ● This user's Manual is subject to change without prior notice. Service Information CST. CO., LTD.
- Page 24 Developer & Manufacturer : CST Co., Ltd. 325, Daeyulnaechu-gil, buki-myun, Cheongwon-gu, Cheongju-si, Chungbuk-do, R.O. KOREA Distributor : Sep. 2017 printed CST. CO., LTD.
Need help?
Do you have a question about the 701ES and is the answer not in the manual?
Questions and answers