Table of Contents
Advertisement
QB-RL78G13 In-Circuit Emulator
Remarks 1. Refer to 1.6 Package Contents for the purchase forms of the above products.
2. As for handling of connectors, refer to 2.3 Mounting and Connecting Connectors (When Using S
Type Socket) or 2.4 Mounting and Connecting Connectors (When Using T Type Socket).
3. The part number of <4> differs depending on the region of use. See Table 1-5 Part Numbers of AC
Adapter for IECUBE Classified by Region for the part numbers. The IECUBE requires an AC
adapter that must be purchased separately.
4.
See Table 1-4 Common Probe and Adapter for the part numbers of <6> and <7>.
5. The combination of <8>, <9>, <10>, <11>, and <12> varies depending on the emulation device. See
Table 1-3 Adapters and Connectors for Each Target Device for the combinations.
6. To determine the T Type socket or the S Type socket, check for "T" or "S" at the end of the socket
product name.
Example:
7. Even with the T Type socket, there may not be a space adapter/YQ connector/mount adapter.
In this case, the device cannot be mounted in the socket.
Check Table 1-3 Adapters and Connectors for Each Target Device.
R20UT0764EJ0200 Rev.2.00
2012.03.30
QB-64FB-EA-01T -> T Type
QB-48NA-EA-02S -> S Type
CHAPTER 1 GENERAL
Page 13 of 44
Advertisement
Table of Contents
