Introduction
The NLS-EM3080-W V2 OEM scan engines (hereinafter referred to as "the EM3080-W V2" or "the engine") are armed
with CMOS image capturer and the Newland patented
featuring fast scanning and accurate decoding on barcodes on virtually any medium-paper, magnetic card, mobile phones
and LCD displays. The EM3080-W V2s can be easily integrated into OEM equipment or systems, such as handheld,
portable, or stationary barcode scanners.
※ Note: This guide provides general instructions for the installation of the engine into a customer's device. Fujian
Newland Auto-ID Tech. Co., Ltd. recommends an opto-mechanical engineer should conduct an opto-mechanical analysis
before integration.
Chapter Description
Chapter 1, Getting Started
Chapter 2, Installation
Chapter 3, Specifications
Chapter 4, Interface
Chapter 5, Configuration Tools
Explanation of Symbols
•
This symbol indicates lists of required steps.
※ This symbol indicates something important to the readers. Failure to read the notice will not lead to harm to the reader,
device or data.
△
!
Caution: This symbol indicates if the information is ignored, it may result in serious injury to the reader, equipment or
data.
About This Guide
Gives a general description of the EM3080-W V2.
Describes how to install the engine, including installation information, housing design,
optical, grounding, ESD, and environmental considerations
Provides technical specifications for the engine.
Provides the definition of interface, connector drawings and timing sequence Diagram.
Introduces useful tools you can use to set up the EM3080-W V2.
, a computerized image recognition system-on-chip,
T M