Table of Contents
Advertisement
Dimensions of the Connector
The EM3080-W V2 uses a 12-pin FPC connector.
12-pin FPC Connector
The EM3080-W V2 uses a 12-pin ZIF connector (bottom contact). This connector can be connected to a host device with
an FFC cable. Parameters are shown as below.
FFC Cable (unit: mm)
A 12-pin FFC cable (contacts on the same side or on opposite sides) can be used to connect the EM3080-W V2 to a host
device. The cable design must be consistent with the specifications shown below. Use reinforcement material for the
connectors on the cable and reduce cable impedance for reliable connection and stable performance.
23
Figure 4-2
Figure 4-3
Advertisement
Table of Contents
