Table of Contents
Advertisement
Main Screen
This is the main screen of the P-20HD.
Available
recording
time
Audio level meter of the
input video
Using the Menus
This explains how to display menus and make settings for video and
for the P-20HD itself.
* The menu is also shown on the display that is connected to the
OUTPUT PREVIEW connector.
1.
Press the [MENU] button to display the menu.
The [MENU] button lights up, the menu categories are displayed.
2.
Turn the [VALUE] knob to select a category, and
press the [VALUE] knob to confirm.
Red border shown on the video that's being output
LIVE IN screen
Video recording counter
(HH: MM: SS)
Playback speed of replay video
REPLAY screen
Audio level meter of the
replay video
The menu for the selected category is displayed.
3.
Turn the [VALUE] knob to select a menu item, then
press the [VALUE] knob to confirm.
The cursor moves to the setting value.
5 If the menu item is located at a deeper level, repeat step 3.
5 Pressing the [EXIT] button moves you back one level higher.
4.
Turn the [VALUE] knob to change the value of the
setting.
5 By turning the [VALUE] knob while pressing it, you can change the
value more greatly.
5 Pressing and holding the [VALUE] knob returns the current menu
item you're setting to its default value.
5.
Press the [VALUE] knob to apply the setting.
The cursor returns to the menu item.
6.
Press the [MENU] button to quit the menu.
Getting Ready
Playback time counter
(HH: MM: SS)
5
Advertisement
Table of Contents
