JVC XV-M565BK Service Manual page 14

XV-M565BK/M567GD
Removing the DVD mechanism
assembly(See Fig.10)
1. While turning the cams R1 and R2 assembly in the
arrow direction h , align the shaft i of the DVD
mechanism assembly to the position shown in Fig.10.
2. Remove the four screw F retaining the DVD
mechanism assembly.
Removing the DVD mechanism
1. For dismounting only the DVD machanism without
removing the DVD mechanism assembly, align the shaft
j of the DVD mechanism assembly to the position
shown Fig.11 while turning the cam R1 and R2
assembly in the arrow direction k.
2. Remove the two screws G raising the DVD mechanism
assembly.
3. Remove the DVD mechanism assembly in the arrow
direction I from the lifter unit (See Fig. 12)
Cam R1, R2 assembly
j
1-14
(See Fig.11 and 12 )
Arrow
Fig.11
Arrow
h
i
F
F
DVD mechanism assembly
k
Lifter unit
Cams R1, R2 assembly
Fig.10
G
DVD mechanism
assembly
Arrow
Fig.12
F
F
l