JVC XV-M565BK Service Manual page 12

XV-M565BK/M567GD
<DVD Changer Mechanism Section>
Removing the DVD mechanism board
1. Remove the DVD mechanism assembly cover.
2. Remove the DVD changer mechanism assembly.
3. From bottom side the DVD changer mechanism
assembly, remove the one screw A retaining the DVD
traverse mechanism control board.
4. Disconnect the card wire from the connectors CN101
and CN102 on the DVD traverse mechanism control
board.
5. Disengage the one engagement a and two
engagements b , remove the DVD traverse mechanism
control board.
Removing the DVD tray assembly
1. Remove the front panel assembly.
2. Remove the DVD changer mechanism assembly.
3. Remove the DVD traverse mechanism control board.
4. Remove the screw B retaining the Disc stopper
5. Remove the three screws C retaining the T.bracket
6. From the clamper base section c, remove both of the
edges fixing the rod(See Fig.2 and 3).
7. Remove the screw D retaining the clamper assembly
8. From the left side face of the chassis assembly, remove
the one screw E retaining both of the return spring and
lock lever(See Fig. 4).
9. By removing the pawl at the section d fixing the return
spring, dismount the return spring(See Fig.4).
10. Remove the three lock levers(See Fig.4).
T.Bracket
C
c
Clamper ass'y
1-12
(See Fig.1)
(See Fig.2~4)
(See Fig.3).
(See Fig.3).
(See Fig.3).
Disc stopper
B
C
Lod stopper
(C/J version only)
C
D
Fig.3
DVD traverse
mechanism
control baord
a
CN102
CN101
b
Fig.1
c
Rod
T.Bracket
Fig.2
Lock lever
Fig.4
A
b
Clamper base
d
Return spring
E