Overview And Important Facts - Pentair MAGICFALLS Installation And User Manual

MagicFalls with LightCascade Technology™ LED Light
®

Overview and Important Facts

This manual describes how to install and replace the MagicFalls with Light Cascade
Technology LED Light.
The MagicFalls Water Effect, in combination with the LightCascade Technology LED
Light assembly (sold separately), includes a waterfall with an elegant lighted effect.
Perhaps no other feature contributes more to the beauty and tranquility of your pool-
scape than the sight and sound of falling water. Built to the highest standard of quality,
and "wet tested" to ensure that your water effect will be soothing and beautiful, the
MagicFalls Water Effects will transform your pool into a romantic oasis, and a breath-
taking focal point. MagicFalls Water Effect are an ideal, energy-efficient addition to
pools, fountains, ponds and more. MagicFalls with LIghtCascade Technology
waterfall provide brilliant vivid multi-colors with spectacular effects for your pool.
Choose one of the seven pre-programmed color light shows or select one of the five
fixed colors to create virtually endless range of dramatic underwater lighting effects for
a spectacular effect in your pool and spa.
If multiple LED lighting is being used, it is recommended that these lights be run in-
dependent of each other, using a separate transformer for each group or type of light.
Otherwise all lights connected to the same transformer will be working together. See
page 2 for more information.
• The Waterfall sheet effect is thin, sensitive to wind, and the width of the
sheet narrows the farther it falls. At fall heights above 3', the sheet effect
begins to break apart and to produce an annoying buffeting noise. A
maximum mounting height of 3 ft. for sheet effect is recommended.
• Waterfall are typically installed in the bond beam, just above the tile line,
or in a raised wall above the bond beam. Three important considerations
include: wall thickness, tile or stone thickness, and the weight of the covering
concrete or stone.
• Use a cartridge filter to supply clean, filtered water to the waterfall. Do not
use a DE or Sand filter. Not using filtered water may let debris pass into
the waterfall and become permanently lodged in the waterfall disrupting the
water flow.
MagicFalls with LightCascade Technology LED Light Installation and User's Guide
1