Table of Contents
Advertisement
INSTALLING THE MAGICFALLS
NOTE: THE TOP OF THE WATERFALL IS NOT FLAT. WATERFALL LIP MUST BE SET
•
¼" LOWER THAN BOND BEAM SO DECK COVER LID FOR LIGHT WILL BE FLUSH
WITH DECK.
•
DISTANCE FROM WATERFALL TOP OF LIP TO TOP OF DECK COVER IS 1.85" AND
SHOULD BE TAKEN INTO ACCOUNT WHEN PLANNING WATERFALL LOCATION.
•
NOTE: IF WATERFALL IS TO BE SET IN A RAISED WALL A 3" PVC PIPE EXTENSION
MAY BE USED BETWEEN THE DECK LID COLLAR AND WATERFALL TOP, THE
LENGTH OF PIPE EXTENSION SHOULD BE ADDED TO THE 1.85" TO ENSURE
PROPER MOUNTING HEIGHT AND PROPER DECK COVER HEIGHT.
TECHNOLOGY™
MagicFalls with LightCascade Technology LED Light Installation and User's Guide
WITH LIGHTCASCADE
®
(CONTINUED)
Optional 3" PVC pipe can be used
to raise the deck lid so that it is
flush with the top deck or surface.
The pipe is glued to the top of the
waterfall and the collar is glued to
the top of the PVC pipe.
11
Advertisement
Table of Contents
