Installing Dc Input Power Cables - Huawei LUNA2000-5-S0 User Manual

LUNA2000-(5-30)-S0
User Manual
----End

5.3.2 Installing DC Input Power Cables

Connect DC input power cables to the inverter
Insert the positive and negative battery connectors (Staubli) into the
corresponding DC input terminals (BAT+ and BAT–).
Step 1 Assemble DC connectors.
Figure 5-11 Assembling DC connectors
For battery terminals, use the delivered Staubli MC4 positive and negative metal
terminals and DC connectors. Using incompatible positive and negative metal
terminals and DC connectors may burn the cables or damage the module. The
resulting device damage will not be covered under warranty.
Issue 07 (2022-01-10)
NO TE
● It is recommended that silica gel or paint be used around the ground terminal after the
PE cable is connected.
NO TE
The DC input terminals (BAT+ and BAT–) on the left and right sides of the battery are the
same.
CA UTION
Copyright © Huawei Technologies Co., Ltd.
5 Electrical Connection
73