Ec Declaration Of Conformity; Machinery Directive; Definitions: Safety Guidelines - DeWalt DCF809 Original Instructions Manual

EC-Declaration of Conformity

Machinery Directive

Brushless Cordless Compact Impact Driver
DCF809
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010, EN60745-2-
2:2010. These products also comply with Directive
2014/30/EU and 2011/65/EU. For more information,
please contact D WALT at the following address or refer
e
to the back of the manual.
The vibration and/or noise emission level given in this
information sheet has been measured in accordance
with a standardised test given in EN60745 and may be
used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
WARNING: The declared vibration and/or noise
emission level represents the main applications
of the tool. However if the tool is used for
different applications, with different accessories or
poorly maintained, the vibration and/or noise emission
may differ. This may significantly increase the exposure
level over the total working period.
An estimation of the level of exposure to
vibration and/ or noise should also take into
account the times when the tool is switched off
or when it is running but not actually doing the
job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect
the operator from the effects of vibration
and/or noise such as: maintain the tool and the
accessories, keep the hands warm (relevant for
vibration), organisation of work patterns.
WARNING: To reduce the risk of injury, read
the instruction manual.

Definitions: Safety Guidelines

The definitions below describe the level of severity for
each signal word. Please read the manual and pay
attention to these symbols.
DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in
death or serious injury.
4
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D WALT.
e
Markus Rompel
Vice-President Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany
17.09.2018
WARNING: Indicates a potentially hazardous
situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
NOTICE: Indicates a practice not related to personal
injury which, if not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.