Definitions: Safety Guidelines; Ec Declaration Of Conformity; General Power Tool Safety Warnings - DeWalt DCF887 Manual

English
Charger
Mains voltage V
AC
Battery type
Approx. charging time min 30 (1.3 Ah) 35 (1.5 Ah) 50 (2.0 Ah)
of battery packs
70 (3.0 Ah) 100 (4.0 Ah) 120 (5.0 Ah)
Weight kg
Charger
Mains voltage V
AC
Battery type
Approx. charging time min 25 (1.3 Ah) 30 (1.5 Ah) 40 (2.0 Ah)
of battery packs
55 (3.0 Ah) 70 (4.0 Ah) 90 (5.0 Ah)
Weight kg
Fuses:
Europe 230V tools
U.K. & Ireland 230V tools

Definitions: Safety Guidelines

The definitions below describe the level of severity
for each signal word. Please read the manual and
pay attention to these symbols.
DANGER: Indicates an imminently
hazardous situation which, if not avoided,
will result in death or serious injury.
WARNING: Indicates a potentially
hazardous situation which, if not avoided,
could result in death or serious injury.
CAUTION: Indicates a potentially
hazardous situation which, if not avoided,
may result in minor or moderate
injury.
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MACHINERY DIRECTIVE
BRUSHLESS CORDLESS COMPACT IMPACT DRIVER
DCF887
D WALT declares that these products described
e
under Technical Data are in compliance with:
2006/42/EC, EN60745-1:2009+A11:2010,
EN60745-2-2:2010.
4
These products also comply with Directive
DCB113
2004/108/EC (until 19.04.2016), 2014/30/EU (from
230
20.04.2016) and 2011/65/EU. For more information,
10.8/14.4/18 Li-Ion please contact D
refer to the back of the manual.
The undersigned is responsible for compilation of
the technical file and makes this declaration on
0.4
behalf of D
DCB115
230
10.8/14.4/18 Li-Ion
Markus Rompel
Director Engineering
D
0.5
D-65510, Idstein, Germany
29.06.2015
10 Amperes, mains
3 Amperes, in plugs

General Power Tool Safety Warnings

The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or
battery-operated (cordless) power tool.
1) WORK AREA SAFETY
2) ELECTRICAL SAFETY
WALT at the following address or
e
WALT.
e
WALT, Richard-Klinger-Straße 11,
e
WARNING: To reduce the risk of injury,
read the instruction manual.
WARNING! Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may result
in electric shock, fire and/or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS
FOR FUTURE REFERENCE
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
c) Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
a) Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock.
b) Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded.