Safety Instructions; Ec Declaration Of Conformity - DeWalt DW292 Instructions Manual

E N G L I S H
NOTICE: Indicates a practice not
related to personal injury which, if
not avoided, may result in property
damage.
Denotes risk of electric shock.
Denotes risk of fi re.
EC-Declaration of conformity
MACHINERY DIRECTIVE
DW292, DW294
D WALT declares that these products described
E
under "technical data" are in compliance with:
2006/42/EC, EN 60745-1, EN 60745-2-2.
These products also comply with Directive
2004/108/EC. For more information, please contact
D WALT at the following address or refer to the back
E
of the manual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D WALT.
E
Horst Großmann
Vice President Engineering and Product
Development
D WALT, Richard-Klinger-Straße 11
E
D-65510, Idstein, Germany
31.12.2009
20

Safety Instructions

WARNING: To reduce the risk of injury,
read the instruction manual.
General Power Tool Safety Warnings
WARNING: Read all safety warnings
and all instructions. Failure to follow
the warnings and instructions may
result in electric shock, fi re and/or
serious injury.
Save all warnings and instructions for future
reference
The term "power tool" in the warnings refers to
your mains operated (corded) power tool or battery
operated (cordless) power tool.
1 Work Area Safety
a Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
b Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust. Power
tools create sparks which may ignite the dust or
fumes.
c Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
2 Electrical Safety
a Power tool plugs must match the outlet.
Never modify the plug in any way. Do not use
any adapter plugs with earthed (grounded)
power tools. Unmodifi ed plugs and matching
outlets will reduce risk of electric shock.
b Avoid body contact with earthed or
grounded surfaces such as pipes, radiators,
ranges and refrigerators. There is an
increased risk of electric shock if your body is
earthed or grounded.
c Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.