Section 8 Referenced Standards - Omron F3SN-A Series Instruction Manual

Section 8 Referenced standards

Section 8 Referenced standards
International Standards
- IEC61496-1 Safety of Machinery: Electro-sensitive Protective Equipment – Part 1: General Requirements
and Tests
- IEC61496-2 Safety of Machinery: Electro-sensitive Protective Equipment – Part 2: Particular Requirements
for Equipment Using Active Opto-electronic Protective Devices
European Standards
- EN61496-1 Safety of Machinery: Electro-sensitive Protective Equipment – Part 1: General Requirements
and Tests
- prEN61496-2 Safety of Machinery: Electro-sensitive Protective Equipment – Part 2: Particular
Requirements for Equipment Using Active Opto-electronic Protective Devices
- EN954-1 Safety of Machinery: Safety-related Parts of Control Systems – Part 1: General Principles for
Design
- EN415-4 Palletizers and depalletizers
- prEN691 Woodworking machines
- EN692 Mechanical presses
- prEN693 Hydraulic presses
U.S. Federal regulations
- OSHA 29 CFR 1910.212 General Requirements of All Machines
- OSHA 29 CFR 1910.217 Mechanical Power Presses
U.S. Standards
- ANSI B11.1 Mechanical Power Presses
- ANSI B11.2 Hydraulic Power Presses
- ANSI B11.3 Power Press Brakes
- ANSI B11.4 Shears
- ANSI B11.5 Iron Workers
- ANSI B11.6 Lathes
- ANSI B11.7 Cold Headers and Cold Formers
- ANSI B11.8 Drilling, Milling, and Boring Machines
- ANSI B11.9 Grinding Machines
- ANSI B11.10 Metal Sawing Machines
- ANSI B11.11 Gear Cutting machines
- ANSI B11.12 Roll Forming and Roll Bending Machines
- ANSI B11.13 Single- and Multiple-Spindle Automatic Bar and Chucking Machines
- ANSI B11.14 Coil Slitting Machines/Systems
- ANSI B11.15 Pipe, Tube, and Shape Bending Machines
- ANSI B11.16 Metal Powder Compacting Presses
- ANSI B11.17 Horizontal Extrusion Presses
- ANSI B11.18 Machinery and Machine Systems for the Processing of Coiled Strip, Sheet, and Standards
- ANSI B11.19 Performance Criteria for the Design, Construction, Care, and Operation of Safeguarding
when Referenced by the Other B11 Machine Tool Safety Standards
- ANSI/RIA 15.06 Safety Requirements for Industrial Robots and Robot Systems
- UL1998 Safety-related Software
- UL508 Industrial control equipment
- UL61496-1 Electro-sensitive Protective Equipment – Part 1: General Requirements and Tests
- UL61496-2 Electro-sensitive Protective Equipment – Part 2: Particular Requirements for Equipment Using
Active Opto-electronic Protective Devices
Canadian Standards
- CAN/CSA 22.2 No. 14, the Standard for Industrial Control Equipment
- CAN/CSA 22.2 No. 0.8, the Standard for Safety Functions Incorporating Electronic Technology
B-42
Downloaded from Elcodis.com electronic components distributor