M8-junction connec- M8-junction connec- tor -M1J tors -M3J tors -M3J, -M5J - 3 or 4 pin - 3, 4 or 5 wire Features 3 or 4 pin 2, 3, 4 or 5 wire 4 pin - LED optionally - LED optionally...
Page 3
General Purpose Cable Connectors (M8 / M12) Y92E Model Number Legend 4. Nr of poles Y92E - @@@@ - @@@ - @ 3 poles 2 3 4 6 7 8 4 poles 5 poles 1. Connector type 5. Shape standard female screw on connector...
Page 4
Y92E-M12PVC5S5M-x Straight Y92E-M12PVC5S10M-x Y92E-M08PUR3A2MLED-x Y92E-M08PUR3A5MLED-x Y92E-M08PVC3A2MLED-x Y92E-M08PVC3A5MLED-x Y92E-M12PUR3A2MLED-x Y92E-M12PUR3A5MLED-x Angled Y92E-M12PUR3A10MLED-x Y92E-M12PVC3A2MLED-x Y92E-M12PVC3A5MLED-x Y92E-M12PVC3A10MLED-x Y92E-MS08PVC3A2M-x Y92E-MS08PVC3A5M-x female Y92E-MS08PVC3S5M-x Straight 5 Snap (PUR) (snap) Y92E-MS08PVC4S5M-x Straight 5 Y92E-MS08PVC3A5MLED-x Angled ‘-L‘ or ‘-H‘ are added to the product description Standard Photoelectric Sensors...
Page 5
240 V M12 5-wire: 60 V with LED: 10-30 V Degree of protection IP67 -25 to +70 °C M8 and M12 (PVC cable) Ambient temperature -25 to +80 °C M8 and M12 (PUR cable) Silicone-free Specials PUR cable: Halogene-free M8 pin assignment...
Page 6
Dimensions General purpose Y92E-M08@-L *a O-Ring O-ring Y92E-M08@-LED-L B Betriebsanzeige grün operation indicator green Funktionsanzeige gelb *a O-Ring function indicator yellow O-ring Y92E-M12@-L *a O-Ring O-ring *b Schutzschlauchmontage hose mounting Standard Photoelectric Sensors...
Page 8
M12 Extended Wiring and Robot Cable Connectors XS2F Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS2F - @@2@ - @@0 - @...
Page 9
XS2F-@42@-@@0-A Connectors with Standard Cable (2, 3 or 4 wires) XS2F-@42@-@@0-R Connectors with Vibration-proof Robot Cable Ordering Information Cable type Cable No. of Core Cable Model UL-listed connection cable diameter length direction cores Standard cable Straight XS2F-D421-DA0-A XS2F-A421-DB0-A 0.5 mm...
Page 10
PBT resin PA resin PBT resin Materials (UL94V-0) (UL94V-0) (UL94V-0) Note: The AC and DC connectors are different as shown here and therefore Block Finish For DC: light gray; for AC: dark gray cannot be connected together. O-ring/rubber bush- Rubber...
Page 11
Straight Connectors 6 dia. 14.9 dia. 40.7 5 dia. 5 dia. L-shaped Connectors 6 dia. 5 dia. 5 dia. Wiring Diagram Standard cable Vibration-proof robot cable Item XS2F-@42@-@@0-A XS2F-@42@-@@0-R Contact Brown Blue (DC) Cable lead colors Two-core model Contact Brown...
Page 12
Cable length (m) direction sectional area Model XS2F-D521-DG0-A Straight 0.3 mm XS2F-D521-GG0-A Dimensions Straight Connectors Note: Use the XS2F-D521-@G0-A in combination with the XS2H-D521-@G0-A. 45° 6 dia. 5 dia. 14.9 dia. Wiring Diagram Pin Arrangements (Engagement Side) Contact No. Brown...
Page 13
XS2Z-13 The Dust Cover is for dust prevention and does not ensure IP67 degree of protection. When mounting the Dust Cover to a connector, be sure to press the Dust Cover onto the Connector until the Connector is fully inserted into the Dust Cover.
Page 14
M8 Small Size and Robot Cable Connectors XS3F Model Number Legend Use this model number legend to identify products from their model number. When ordering, use a model number from the table in Ordering Information. XS3F - @42@ - 4@@ - @...
Page 15
Specifications Rated current Rated voltage 125 VDC 40 MΩ max. (20 mV max., 10 mA max.) Contact resistance (See note 1.) Insulation resistance 1,000 MΩ min. (at 500 VDC) 1,000 VAC for 1 min (leakage current: Dielectric strength 1 mA max.) (See note 2.)
Page 16
Dimensions M8 Screw-on cable connectors Straight Connectors 2.15 4 dia. 12.9 9 dia. 1.95 0.5 21.5 31.4 L-shaped Connectors 4 dia. 9 dia. Wiring Diagram Contact No. Brown White Blue Black Cable lead colors A-16 Standard Photoelectric Sensors...
Page 17
Dimensions M8 Snap-in cable connectors Straight Connectors 2.15 4 dia. 13. 9 0. 5 1.95 21.1 30.7 L-shaped Connectors 23.1 19.8 4 dia. 8.2 dia. 2.15 1.95 Wiring Diagram Contact No. Brown White Blue Black Cable lead colors A-17...
Page 18
Storage the thread bracket may be damaged. Be sure to tighten each thread bracket by hand within a torque of 0.3 and 0.4 N·m. If the Do not store Connectors for long periods of time in the following thread bracket is not tightened securely, the Connector may not...
Page 19
- 4, 6 or 8 contacts - 4 or 5-pin cables per box - IP67 I/O connector terminal boxes Please contact your OMRON representative for our large portfolio of remote I/O for bus connection Waterproof water proof cover cover for M12 brass...
Page 20
Connectors Brass/nickel base, 0.4-μm gold plat- Contacts XS2H Connectors on one cable end (Plugs) Sheath color: gray Note: 1 . Please refer to seperate datasheet X073-E1-01 for these models. Cable Cable Core size: AWG18/AWG22 (See note.) Case PBT resin (UL94V-0)/light gray...
Page 21
1 through 4, power supply, and ground are the same. 6 . Contact numbers 7 and 8 in the above diagrams do not exist on Terminal Boxes with six inputs. The lead colors for signals 1 through 6, power supply, and ground are the same.
Page 22
33 54 30.5 Internal connection indication 14 dia. 9 dia. 13.5 4.5 dia. Mounting holes Three, M4 or 4.5 dia. 33± 73± Note: Mounting hole dimensions are always the same regardless of the number of ports. A-22 Standard Photoelectric Sensors...
Page 23
Connector on one cable end XS2R-D426-G10-F XS2R-D426-1 XS2R-D426-5 Without cable Y-Joint plug/socket XS2R-D426-81 XS2R-D426-82 Note: Orders are accepted in multiples of the minimum order. Dimensions XS2R-D426-@11-F Internal Connections Connectors on Cable Ends (Y-Joint Plug/Socket) 4.6 dia. 6 dia. Blue mark...
Page 24
14.6 dia. C (Male) XS2R-D422-5 A (Female) B (Female) C (Male) XS2R-D423-1 Bifurcated Model Internal Connections A (Male) B (Male) C (Female) 14.6 dia. XS2R-D424-1 Internal Connections Daisy-chain Model A (Female) B (Male) 14.6 dia. C (Female) A-24 Standard Photoelectric Sensors...
Page 25
Precautions • Before using the XS2R for Sensors, make sure that the wiring of the Sensors and the internal connections of the XS2R are correct. XS2R Application Examples XS2R-D422-1 (Aggregate Model) A pair of Two-wire Sensors or Three-wire Sensors can...
Page 27
The Dust Cover is for dust prevention and does not ensure IP67. S8 Socket When mounting the Dust Cover to a Connector, be sure to press the Dust Cover onto the Connector until the Connector is fully inserted into the Dust Cover.
Page 28
Accessories for Standard Photoelectric, Inductive and Capacitive Sensors Accessories Mounting brackets, covers, slits and adjustment aids For cylindrical shapes Product Shape Type Housing material Features Order reference Applicable sensors group - cost efficient mounting -E3F2 bracket Y92E-B -E2A - for M8, M12, M18, M30...
Page 29
Product Shape Type Housing material Features Order reference Applicable sensors group - slit cover for precision detection and posi- tioning with through slit cover polyarylate Y92E-ES18 E3F2-10 beam photo sensors - for M18 photo electric sensors Adjustment aid for sensivity...
Page 30
Applicable Shape Type Housing material Features Mounting type Order reference Sensors back wall mounting E39-L119 E3T-F side wall mounting E39-L120 horizontal angle back wall mounting E39-L132 adjustment General purpose Stainless steel E3G-R mounting (SUS 304) side and back wall E39-L131...
Page 31
Applicable Shape Type Housing material Features Mounting type Order reference Sensors E3G, E3MC, E3S- E39-EL4 A, E3S-C, E3Z General purpose surface, side and 3D rotation E39-EL5 backwell mounting mounting Stainless steel (SUS 304) E3S-LS, E3S-B, E3T, E3Z, E3C E39-EL6 inclination angle...
Page 32
E39-L98 adjustment mounting -E3S-C (horizontal) E39-L97 E3S-C (vertical) Stainlless steel (SUS 304) - 360° horizontal rotation -E39-L150 side and back wall mounting - max telescope -E39-L151 length -E3Z -E39-R3 side wall, back wall 3D rotation around and surface moun- E39-L93...
Page 33
Shape Type Features Mounting type Order reference Sensors E39-S65 E3Z-T -E39-S63 Precision detection - slit width from dia 0.5 mm for min object E3T-@T slit cover size detection of dia 0.2 mm -E39-S64 snap on E39-S61 E3S-CT 10.8 Mutual interfe-...
Page 34
51.4 x 60.3 x 8.5 41.8 x 22.5 x 11 23 x 13.7 x 4.9 Order reference E39-R1S E39-R9 E39-R42 E39-R3 E39-R4 - Retroreflective photo electric sensors - non polarzing Applicable sensors - Retroreflective photo electric sensors - polarizing (MSR) A-34 Standard Photoelectric Sensors...
Page 35
E39-R7 E39-R37 E39-R1K - Retroreflective photo electric Polarizing and Recommended for harsh environ- sensors - non polarzing Recommended for fine beam and laser sensors non-polarizing ment sensors (e.g. E3F2-R@-S, (E3S-CR62/67, E3C, E3X) photoelectric - Retroreflective photo electric E3S-CR, E3ZM) sensors...