Kongsberg HiPAP 501 Product Description page 35

Product Description
Mounting flange
There are two different flanges available one with 500 mm
aperture and one with 350 mm aperture. Standard height is 600
mm. Optional length is available on request.
Hoist Control Unit
This unit holds the power supplies and control logic for the hoist
and lower operation of the hull unit. It also has a local control
panel for local control of the hoist / lower operation.
Hoist Control Unit with Ethernet interface
APOS and HiPAP® mk II support remote control of the Hull
Unit Hoist and the Gate Valve. A new control unit for the hoist
control and/or the gate valve is required. In addition this must be
enabled in the HiPAP® program.
Remote Control Unit
This unit is normally mounted close to the display unit in the
operation room. It allows remote control of the hoist and lower
operation of the hull unit.
317748/F 27