Kongsberg HiPAP 501 Product Description page 25

Description
Inclinometer Mode
APOS software for HiPAP
operation
Compass Transponder Mode
APOS software for HiPAP
operation
GEO LBL Calibration
APOS software for HiPAP
array in geographical co-ordinates. In positioning mode the
position may be reported in geographical co-ordinates.
LBL Transponder Positioning mode
APOS software for HiPAP
transponders to be positioned in an LBL network.
(old name was "Transponder Range Positioning")
This mode requires that the system already has the LBL function:
212748
SAL Reference
APOS software for HiPAP
a vessel's distance (numeric value) relative to a known coordinate
in a UTM coordinate system.
®
Dual HiPAP Increased SSBL Accuracy function
APOS and HiPAP ®
accuracy in dual HiPAP
measurement of transponder position by use of two HiPAP
transducers.
Provides two separate and one integrated position
Requires two complete HiPAP
HiPAP ® SSBL function
APOS Additional Operator Station Function
Software and hardware for allowing several Operator Stations for
®
HiPAP and HPR 400 systems.
APOS Upgrade software
Upgrade from HSC400 software to APOS software, including old
functionalities.
This upgrade may require a new monitor and a new computer and
keyboard (will be additionally priced).
317748/F
®
or HPR 400 inclinometer transponder
®
or HPR 400 compass transponder
®
or HPR 400 for calibration of LBL
®
or HPR 400 for use of MPT
®
or HPR 400 for calculation displaying
software for enabling increased SSBL
® configurations. Provides simultaneous
® transceivers/ transducers, and
Product Description
Reg. no
886-212753
886-212754
886-212755
886-212757
334053
886-212758
®
886-212759
886-212760
17