Advertisement
Table of Contents
Kids Rocking Llama
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
screws
nuts
x8
x4
E
rockers
x2
Hardware Supplied
Phillips screwdriver required.
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558
C
D
handles
cross bars
x2
x2
F
body
x1
WARNING: Due to the small size of the hardware
and the sharp points of the screws, they are
potentially hazardous.
Keep all assembly parts and packaging materials
out of reach of children
Retain packaging information for future reference
Adult assembly required
Recommended age 18 months +
1
Advertisement
Table of Contents
Related Manuals for Mocka Llama
Summary of Contents for Mocka Llama
- Page 1 Retain packaging information for future reference Phillips screwdriver required. Adult assembly required For quicker assembly, we recommend the use of a power drill on a low-speed setting. Recommended age 18 months + mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 2 If the holes on the cross bar (D) are not lining up, place one leg in the hole on the cross bar (D) and then apply pressure to get the other leg to match up with the second hole on the cross bar (D). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
- Page 3 Attach 1 x body (F) to the assembled rocker and secure with 4 x nuts (B) and tighten. Attach 2 x handles (C) onto the body (F) as shown and rotate to tighten. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore BC, QLD, 4558...
Need help?
Do you have a question about the Llama and is the answer not in the manual?
Questions and answers