MP DUEX PLUS User Manual

1
Package overview
1 . 1
Monitor & accessories
1
2
1
3
4
Duex Plus 1
Interchangeable usb Type-C ports
Backcharging port And signal port
2
Menu Buttons
ft Inside Panel
Accessories
1
USB Type-C cable with USB-A
to C adapter
2
Magnetic Plates
3 Adhesive stickers
2
Driver installation guide
When using USB C to connect, driver installation is not necessary.
2 . 1
Windows installation guide
Left Inside Panel
Connect Windows Laptop to Mobile Pixels Duex Plus Monitor, wait 20 secs and the monitor should
turn on. In the event the monitor does not turn on, please follow the steps below:
1.
Please download the correct windows driver WWW.MOBILEPIXELS.US/PAGES/DOWNLOAD-DRIVERS
from:
2. 3.
Double click and launch the installer. Click "Yes"
in the window below.
4.
Please select "I accept the terms of the license
agreement" and click Next
2 . 2
Apple OS installation guide
Do not plug the Mobile Pixels Device into your mac before executing the driver installation
1.
5
Please download the Mac driver from the link below.
Run the "Mobile_pixels_3.3-2021-04-19.dmg" file to
load the drivers to the mac folder
WWW.MOBILEPIXELS.US/PAGES/DOWNLOAD-DRIVERS
3.
The system should pop up a screen "System Extension Blocked" after installation asks the user to enable these
extensions for the first time .Click "Open Security Preference" to go setting.
3
Magnetic Plates
4 Metallic Plates
5
Screen
Center Inside Panel
Important: This warning is not always shown. Even if it is not shown, for new installations the user must "Allow" to
install the Mobile Pixels driver and restart the laptop
1 2
4
4.
(After System Reboot) Connect Mobile Pixels device
to Mac computer, a screen recording prompt should
pop up "Click Open System Preferences"
5.
Go to System Preferences > Security & Privacy >
Privacy
7.
Scroll and select "Screen Recording" and check
"DJTVirtualDisplayAgent"
Click "Next" in the Window below:
5.
Please select "Yes, I want to restart my computer
now" and click Finish
2.
Click
Mobile_Pixels_Graphics_Driver-3.3-2021-04-19.pkg,
please follow the instructions to install the device
driver.
Center Inside Panel
6.
Click on the "Lock" to make changes
8.
Click on the Lock to save changes Click "Quit Now"
and restart the laptop.
3
Monitor positioning guide
3.1
Attachment mode
Monitor
Side
Front of
the laptop
1.
Place the magnetic plates towards the monitor side 2.
Make sure that Duex Plus is centered in the back of
and remove the adhesive stickers.
the laptop
4.
3.
Open the laptop monitor. Slide Duex Plus and swivel the screen.
*USB Cable omitted
3.2 Rotated monitor
Right Inside Pan Right Inside Pan
1. 2.
To use it on the other side, rotate 180 degrees .
Slide it and you are ready to work.
Snap into the back of the laptop.
3.3
Portrait Mode
1. 2.
Slide Duex Plus Rotate around 110° degrees Connect Duex Plus to the Pc and use it in
portrait mode Go to Display settings to rotate
display
*USB Cable omitted
3.4 Presentation Mode
Right Inside Panel
2.
1.
Slide Duex Plus and rotate it To access presentation mode, simply swivel Duex
Plus 180 degrees to the back of the laptop.
*USB Cable omitted
3.5 Nintendo Switch & Android mode Duex Plus Only
1.
First connect the original
power cable of your
switch/android device to
Duex Plus, then connect
Switch/Android device
to Duex Plus