Other Settings - Secabo T60 II Operating Instructions Manual

Adjust speed and contact pressure
You can make the following changes by pressing the corresponding buttons: The "+" function is
located at the upper end of the button, while the "­" function is at the lower end.
Increase and reduce speed
The cutting speed and contact pressure cannot be changed while a plotting job is in progress​ .
Other settings
The configuration menu is opened by pressing and holding the "Set" button for 5 seconds.
Use the up and down arrow keys to cycle through the menu options.
Left and right arrow keys allow you to adjust the relevant values.
Secabo GmbH | Hochstatt 6­8 | 85283 Wolnzach | Germany | mail@secabo.com | www.secabo.com
Increase and reduce speed
13