Table of Contents
Advertisement
Registering and Changing the Server
The VB Package Version lets you register the camera server and relay server and thereafter you can
connect simply by selecting a registered server. Here we explain how to change the registration of
the camera site and relay server.
Registering in a Camera Site List
Adding to a list
A camera server can be registered during connection by clicking the "Register connected
site" button or choosing "Register Site" in the File menu. If the site is currently not
connected, it can be registered following the procedure below:
1
2
I Nickname
I Host Name
I Port No.
I Relay Server
46
Procedure
Any name can be given to the camera server being registered.
Specify the IP address of the camera server.
Specify the Port numbers of each camera server. The port numbers are the values
that were set on the camera server.
If connections to the camera site being registered is not to be made via a relay
server, select "Not Used"; if a relay server is to be used, select the registered name
of the relay server (see p. 48).
VB Package Version only
Choose "Camera Site List" from the View
menu. When the camera site list appears,
click Add.
Enter each item and click OK. The site is
added to the list.
Advertisement
Table of Contents
