Selecting The Camera; Using Presets - Canon WEBVIEW LIVESCOPE 3.2 User Manual

Selecting the Camera

When multiple cameras are installed on the camera server, you can switch between
cameras. Click in the Camera selection bar to view the list of cameras. When you select a
camera from the list of names, the display changes to show the video from that camera.

Using Presets

You can control the camera by selecting preset camera positions (presets) registered on the
camera server.
Click in the Presets selection bar to view the list of preset positions. When you select a
preset position from the list, the display changes to show the video from that position.
c
Note
18
Procedure
Procedure
The presets and camera selection options displayed are those set on the
camera server. If no presets or additional cameras are registered on the
camera server, no selection options are shown.
Camera selection bar
Preset selection bar