Step 11, Install Door Panels - GE PSB42LGRWV Installation Instructions Manual

11 INSTALL DOOR PANELS
Install 1/4" Decorative Panels:
• Remove Handles
Open door to 90°. Remove 5 Phillips head screws
from the Fresh Food and Freezer door handles,
retain all screws. Lift off door handles.
• Install Door Panels
Carefully push the Fresh Food panel in until it
slides into the slot behind the trim. Gently push
to opposite side. Repeat procedure for upper
and lower Freezer panels.
• Reinstall Handles
Reinstall Fresh Food door handle with the original
5 Phillips head screws. Tighten. Repeat for Freezer
door handle.
NOTE: Ensure that the edge of the handle does not
pinch the door gasket.
• 3/4" Custom Decorative Panels
If you choose to install custom wood panels they
must be cut to dimensions shown on page 10 and
11. The panels will slide into the frame on the doors
and grille.
IMPORTANT NOTE: Maximum custom panel thick-
ness must not exceed 1" thick and 70 lb for Fresh
Food door, 30 lb total for Freezer door and 15 lb
for Grille panel.
Installation Instructions
18
Handle
Fresh Food
Refrigerator
Door
3/4" Custom Panel
if Required