Step 6: Connect Electrical; Step 7: Slide Range Into Position; Step 8: Replace Oven Doors - GE Monogram ZDP30L4HSS Installation Instructions Manual

Step
6
Plug power cord into properly grounded
receptacle.
Connect
Electrical
7
• Carefully, slide the range into position.
Step
• Be sure the right rear leg is engaged in the
Slide the
• Check for proper installation by grasping the
Range
Into
• Check to be sure the front of the range is
Position
• Replace the front kick panel by reversing the
8
To replace the oven doors:
• Slide the hinges into the openings. The
Step
• Open the door fully and unlock hinge
Replace
Oven Door(s)
CAUTION: Take care when replacing the
oven doors. If the hinge latch is not securely
locked, the hinge may snap back and sepa-
rate. If the hinge separates, you must apply
pressure (possibly with your foot) to press it
back together and then engage the brass
hinge latch.
12
– Be careful not to entange power cord and
gas flexible tubing.
slot of the installed anti-tip bracket.
range at the top front edge and carefully
attempt to tilt the range forward.
level. Adjust front leveling legs accordingly.
proceedure described in Step 1.
hinge should rest in the center of each
hinge roller.
latches.
Installation
Professional Ranges
Door Hinge Roller
Lock
(Closed)
Un-Lock