Functional Description; Intended Use; Product Features - Bosch Professional GHO 40-82 C Original Instructions Manual

OBJ_BUCH-633-003.book Page 17 Wednesday, November 4, 2009 2:03 PM
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held
more secure than by hand.
Never use the machine with a damaged ca-
ble. Do not touch the damaged cable and
pull the mains plug when the cable is dam-
aged while working. Damaged cables in-
crease the risk of an electric shock.
Products sold in GB only: Your product is fitted
with an BS 1363/A approved electric plug with
internal fuse (ASTA approved to BS 1362).
If the plug is not suitable for your socket outlets,
it should be cut off and an appropriate plug fit-
ted in its place by an authorised customer serv-
ice agent. The replacement plug should have the
same fuse rating as the original plug.
The severed plug must be disposed of to avoid a
possible shock hazard and should never be in-
serted into a mains socket elsewhere.
Products sold in AUS and NZ only: Use a resid-
ual current device (RCD) with a rated residual
current of 30 mA or less.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for planing of firmly
supported wooden materials, such as beams
and boards. It is also suitable for beveling edges
and rebating.
Bosch Power Tools

Product Features

The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Depth adjustment knob
2 Chip ejector (alternatively right/left)
3 Storage compartment for planer blade/
Allen key
4 Planing depth scale
5 Lock-off button for On/Off switch
6 On/Off switch
7 Belt cover
8 Screw for belt cover
9 Chip ejection selector lever
10 Planer base plate
11 V-grooves
12 Handle (insulated gripping surface)
13 Blade drum
14 Clamping element for blade
15 Fastening screw for planer blade
16 Carbide blade (TC)
17 Lateral blade-shaft protector
18 Allen key
19 Extraction hose (Ø 35 mm)*
20 Chip/dust bag*
21 Parallel guide*
22 Locking nut for adjustment of rebating
width
23 Fastening bolt for parallel and beveling
guide
24 Angle stop*
25 Locking nut for angle adjustment
26 Fastening bolt for rebating depth stop
27 Rebating depth stop*
28 Park rest
29 Service station*
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
1 609 929 T24 | (4.11.09)
English | 17