Functional Description; Intended Use - Bosch GHO 14,4 V Professional Original Instructions Manual

When working, always hold the planer in
such a manner that the planer base plate fac-
es flat on the workpiece. Otherwise the plan-
er can become wedged and lead to injuries.
Never plane over metal objects, nails or
screws. The planer blade and the blade shaft
can become damaged and lead to increased
vibrations.
Secure the workpiece. A workpiece clamped
with clamping devices or in a vice is held more
secure than by hand.
Before any work on the machine (e. g. main-
tenance, changing the tool, etc.) as well as
during its transport and storage, lock the
On/Off switch in the off position. There is
danger of injury when the On/Off switch is un-
intentionally actuated.
Avoid unintentional switching on. Ensure the
On/Off switch is in the off position before in-
serting battery pack. Carrying the power tool
with your finger on the On/Off switch or in-
serting the battery pack into power tools that
have the switch on invites accidents.
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
also against continuous sun irradiation
and fire. There is danger of explosion.

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may result
in electric shock, fire and/or serious
injury.
While reading the operating instructions, unfold
the graphics page for the machine and leave it
open.

Intended Use

The machine is intended for planing of firmly sup-
ported wooden materials, such as beams and
boards. It is also suitable for beveling edges and
rebating.
Bosch Power Tools
Product Features
The numbering of the product features refers to
the illustration of the machine on the graphics
page.
1 Chip ejector (alternatively right/left)
2 Depth adjustment knob
3 Planing depth scale
4 Chip ejection selector lever
5 Safety switch for On/Off switching
6 On/Off switch
7 Battery*
8 Battery unlocking button
9 Belt cover
10 Screws for belt cover
11 V-grooves
12 Planer base plate
13 Blade drum
14 Clamping element for blade
15 Fastening screw for planer blade
16 Carbide blade (TC)
17 Allen key*
18 Extraction hose ( Ø 35 mm)*
19 Chip/dust bag*
20 Parallel guide*
21 Scale for rebating width
22 Locking nut for adjustment of rebating width
23 Fastening bolt for parallel and beveling guide
24 Angle stop*
25 Locking nut for angle adjustment
26 Fastening bolt for rebating depth stop
27 Rebating depth stop*
28 Drive belt
29 Large pulley
30 Small pulley
*The accessories illustrated or described are not in-
cluded as standard delivery.
**Commercially available (not included in the delivery
scope)
English | 17
1 609 929 N13 | (16.1.08)