Advertisement
Available languages
Available languages
- Always unplug the power before cleaning the filters.
- The pre-filter can be reused after removing dust and cleaning with water.
- If the pre-filter is not cleaned for a long time, the product performance may
decrease and problems may occur.
Tips
- Fine dust filter, Deodorization filter and HEPA filter cannot be reused after cleaning.
Never clean them with water.
■ Pre-filter (clean every 2-4 weeks)
1. Pull the upper part of the front cover to open.
2. Pull the pre-filter handle to take it out.
∗ Be careful that dust doesn't fall out during removal.
3. Remove dust with water or a vacuum cleaner depending on the
degree of contamination
∗ Be careful not to let dust enter the purifier while cleaning.
4. Push the completely dry pre-filter all the way into the purifier to install it. Close the front cover again.
▶
15
16
Advertisement
