Advertisement
Available languages
Available languages
BEFORE USE
Please check before use
Only connect the power cord to the voltage rating that matches it on the rating plate.
How to install filter
- Be sure to install the filter after removing the plastic packaging.
- Only use it indoors.
- When not in use, remove the power plug from the socket.
- During filter assembly, check the front of the filters.
Tips
▶ Filter assembly order: HEPA filter → Deodorization filter →
1. Open the front cover.
Pull the upper part of the front cover to open.
2. Take out the filter and remove
the plastic packaging.
Remove the plastic packaging from filters,
excluding the pre-filter, and assemble them
in the purifier in order.
∗ Filter assembly order: HEPA filter →
Deodorization filter → (Fine dust filter) →
Pre-filter
3. Reattach the front cover.
Fit the two tabs on the bottom part of the
front cover into their slots and push to install.
∗ If the front cover is not properly attached,
the product will not operate.
Fine dust filter → Pre-filter
▶
9
10
Advertisement
