Advertisement
DISPLAY OPERATION
BUTTONS
Mode: Press the mode button to cycle through and monitor the different functions. Press
and hold the mode button for 3 seconds to reset the display unit back to factory settings.
Reset: Press the rest button to clear the current the data of function that is currently being
displayed.
FUNCTIONS
Time:
Displays the total elapsed time of your workout (0-99:59).
Speed:
Displays your current running speed (0-99.99 ML/H).
Distance:
Counts the total elapsed distance of your workout (0-99.99 ML).
Odometer:
Displays the total accumulated distanced travelled (0-9999 ML)
(if available)
By placing the palms of your hands on both of the contact pads for 30
Pulse:
seconds the monitor will display your heart rate in beats per minute
(if available)
during your workout (40-240 BMP).
Calories:
Counts the total calories burned during your workout (0-999.9 K/CAL).
Automatic cycles through the following functions in the order shown:
Scan:
TIME-SPEED-DISTANCE- PULSE (if available)-CALORIES (repeat).
AUTO ON/OFF
•
The display will automatically turn on when any key is pressed or when it receives a
signal input from the speed sensor.
•
The system turns off automatically when the sensor has no signal input or no buttons
are pressed for approximately 4 minutes.
LOW BATTERY
If the display is not operating correctly, the batteries may be flat and will need to be
replaced.
Advertisement
