Advertisement
Step 2: Left & Right Foot Pedals, Left & Right Foot Bar, Left & Right Handrail Arm
•
Remove x2 M10x20 Hexagon Bolts (27), x2 Ø19.5xØ11.5x2.5 Spring Washers (28), x2
Flat Washers Ø10xØ25x2.0 (87), x2 Ø28xØ16x5 D-Shape Washers (29) and x2
Ø22xØ 17x0.3 Wave Washers (31) from the Rotation Rod (81).
•
Insert the Rotation Rod (81) into the hole of the Main Frame (1).
•
Attach x2 Ø22xØ17x0.3 Wave Washers (31) onto the Rotation Rod (81), then attach
L & R Handrails (5)(6) onto the Rotation Rod (81) using x2 Ø28xØ16x5 Washers
(29), x2 Flat Washers Ø10xØ25x2.0 (87), x2 Ø19.5xØ11.5x2.5 Spring Washers (28)
and x2 M10x20 Hexagon Bolts (27). Tighten using Allen Wrench provided.
•
Remove Washer Ø17.6xØ 34x2.0 (76), Washer Ø41xØ 29x4.0 (77), Bearing Ø31xØ
29xØ13x11 (89) and Right Nylon Nut (83) from the Right Foot Pedal (12).
•
Attach the Right Foot Pedal (12) onto the right Crank (62) using Washer
Ø17.6xØ34x2.0 (76), Washer Ø41xØ 29x4.0 (77), Right Foot Bar (8), Bearing
Ø31xØ29xØ13x11 (89) and Right Nylon Nut (83). Tighten the Right Foot Pedal (12)
by hand clockwise and tighten the Right Nylon Nut (83) clockwise using Allen
Wrench and Spanner provided.
•
Repeat the same procedure to attach the Left Foot Pedal (11) onto the left Crank
(62), tighten the Left Foot Pedal (11) counter-clockwise and tighten the Left Nylon
Nut (82) counter-clockwise using Allen Wrench and Spanner provided.
Note:
Do not turn the Left pedal clockwise to tighten or will strip the threads.
•
Insert the Right Handrail Arm (4) into the Plastic Bushing on the tube of the Right
Handrail (6) using M8 Handrail Arm Adjustable Knob (32).
•
Repeat the same procedure to assemble the Left Handrail Arm (3).
Advertisement
