Advertisement
Step 3: Seat Post, Seat Cushion
•
Remove x3 Ø8xØ16x1.5 Flat Washers (17) and x3 M8 Nylon Nuts (18) from under
the Seat Cushion (16).
•
Attach the Seat Post (15) to the Seat Cushion (16) using x3 Ø8xØ16x1.5 Flat
Washers (17) and x3 M8 Nylon Nuts (18). Tighten using the Spanner with Phillips
Screwdriver provided.
•
Insert the Seat Post (15) into the Seat Post Plastic Bushing on the tube of the Main
Frame (1) and then attach the M16 Seat Height Adjustable Knob (63) onto the tube
of the Main Frame (1) by turning it in a clockwise direction to lock the Seat Post (15)
in the suitable position.
Tools:
Spanner with Phillips
Screwdriver S13-S14-
S15
Advertisement
