Advertisement
Adjusting the Seat Height
Turn the M12 Seat Height Adjustable Knob (63) in a counterclockwise direction to release the
Seat Post (15) and then slide the Seat Post (15) up or down slightly to the desired hole for the
suitable position. Lock the Seat Post (15) in place by tightening the M12 Seat Height
Adjustable Knob (63) in a clockwise direction.
Note:
When adjusting the height of seat post, make sure the seat post plastic bushing does
not exceed the mark line on the seat post.
Step 4: Display, Display Post Installation
•
Connect the Sensor Wire (75) with the Extension Sensor Wire (20).
•
Remove x2 Ø8xØ16x1.5 Flat Washers (17) and x2 M8x30 Hexagon Bolts (23) from
the Display Post (2).
•
Attach the Display Post (2) onto the Main Frame (1) with x2 Ø8xØ16x1.5 Flat
Washers (17) and x2 M8x30 Hexagon Bolts (23). Tighten using the S6 Allen
Wrench provided.
•
Connect the Extension Sensor Wire (20) with the wire of the Display (19).
•
Remove x2 M5x10 Cross Pan Head Screws (22) from the Display (19).
•
Then attach the Display (19) onto the top end of Display Post (2) use x2 M5x10
Cross Pan Head Screws (22). Tighten using the Spanner with Phillips Screwdriver
provided.
Advertisement
