Advertisement
Quick Links
Advertisement
Related Manuals for Kogan FORTIS RC-50
Summary of Contents for Kogan FORTIS RC-50
- Page 1 MAGNETIC FLYWHEEL RECUMBENT BIKE (RC-50) FSMFRCMBK2A...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS • Ensure that the bike is in a safe usable condition. Check all the screws, nuts, and other connections before using the machine for the first time. • Set up the machine in a dry and level place. Keep it away from moisture and water. - Page 4 OVERVIEW...
-
Page 5: Parts Description
Parts Description Specification Qty. Main Frame Seat Frame Handlebar Guide Rail Handlebar Post Front Stabiliser Rear Stabiliser Handle Carriage Bolt M8xl74 Carriage Bolt M8xl45 Acorn Nut Φ25 X 8.5 X R33.5 Arc Washer Spring Washer Allen Screw M8x16 D8 X 1.5 X Φ16 Washer Axle Spring Washer Axle Spring Washer... - Page 6 Parts Description Specification Qty. Foam Grip Square End Cap Square End Cap Bushing Bracket Saddle Backrest Plug Round End Cap Crank Pulse Wire Extension Pulse Wire 1 Sensor Wire Computer Extension Pulse Wire 2 Washer Square End Cap Cross Tapping Screw ST4.2x18 Allen Screw M8x30...
- Page 7 ASSEMBLY Step 1: Lock the Front Stabiliser (6) and Rear Stabiliser (7) to the Main Frame (1) with Carriage Bolts (9), Arc Washers (12) and Acorn Nut (11). Fix the Adjusting Pad (28) and Nut (53) to the Main frame (1). Step 2: Lock the Pedals (27L and 27R) to the Crank (40) using a wrench.
- Page 8 Step 3: Connect Extension Pulse Wire 2 (45) with Extension Pulse Wire 1 (42). Connect Extension Sensor Wire (30) with Sensor wire (43). C. Connect the Tension Wire (52) with Tension Controller (23) as shown. D. Lock the Handlebar Post (5) on the Main Frame (1) with Allen Screw (14) and Arc Washers (12).
- Page 9 Step 4: Attach the Handlebar (56) to the Handlebar Post (5) with the Allen Screw (49) Spring Washer (13) and Washer (46). Insert the Handlebar Cover (54). C. Connect the Extension Pulse Wire 2 (45) and Extension Sensor Wire (30) with the wire of Computer (44).
- Page 10 Step 6: Insert the Handle (8) into the Eccentric Shaft (19) and lock it with Hex Bolt (22). Insert the Handlebar (3) into Seat Frame (2) and lock it to Seat frame (2) with the Carriage Bolt (10), Washer (15) and Acorn Nut (11). C.
-
Page 11: Operation
OPERATION • The system turns on when any key is pressed or when it receives Auto On/Off input from the speed sensor. • The system turns off automatically when the speed has no signal input or is inactive for approximately 4 minutes. Reset The bike can be reset by either changing battery or pressing and holding the MODE key for 3 seconds. - Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...