Advertisement
Quick Links
Advertisement
Related Manuals for Kogan FSDESKBIKWA
Summary of Contents for Kogan FSDESKBIKWA
- Page 1 HOME & OFFICE EXERCISE BIKE WITH HEIGHT ADJUSTABLE DESK FSDESKBIKWA, FSDESKBIKBA...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS WARNING: To reduce the risk of serious injury, read the following safety instructions before using the equipment. Read all warnings posted on the equipment. Follow all safety instructions in this manual. Read this manual and follow it carefully before using the equipment. Make sure that it is properly assembled and all fasteners are tightened before use. - Page 4 OVERVIEW Part No. Part Name Qty. Stabiliser 4pcs Crank 2pcs Main frame Knob 2pcs Seat Front wheel (non-lockable) 2pcs Rear wheel (lockable) 2pcs Resistance dial Pedal 2pcs Table Post Table bolt Flat washer Spanner 2pcs...
- Page 5 It is recommended to retain packaging in case transportation of the product is required. If any part is missing, contact Kogan.com. Place on the floor and unfold stabilisers to the maximum angle as shown below.
- Page 6 Place the right pedal (marked R) on the right side crank arm and the left pedal (marked L) on the left side crank arm. Note the pedals are not interchangeable: incorrect installation may cause damage. Thread the right pedal clockwise and the left pedal anticlockwiseonto their respective arms.
- Page 7 Place the table onto the post and secure by using the flat washer and bolt. Tighten the bolt by hand. The front/rear wheels are optional and allow the equipment to be moved easily. To install: Remove the foot pads (which are pre-attached to the underside of the stabilisers). Attach the front and rear wheels to the front and rear stabilisers respectively and tighten using spanner.
- Page 8 Resistance Adjustment The resistance can be set from 1 (least) to 8 (most) Turn the dial clockwise to increase the resistance and turn it anticlockwise to decrease the resistance. Seat Adjustment NOTE: Do not completely remove the adjustment knob from the frame. To adjust the seat, you will need to loosen the knob and then pull the knob outward.
- Page 9 Table Adjustment Turn the post adjustment knob anticlockwise to loosen. Pull the knob outward and move the post up/down at the same time. Once the required position is reached, release and tighten the knob. Ensure that the seat is locked will not move by pulling up on the seat. Loosen the table bolt and move the table front or back.
- Page 10 Monitor Display NOTE: The monitor will not function without a CR2032 battery installed. Display Button: The display will be blank when not in use. To use, simply start pedalling and the monitor will display time/speed/distance/calories. The display will automatically start in scan mode. During this mode, the scan icon on the left side of the display will be visible and flashing.
- Page 11 Battery Replacement Remove the post and remove the knob from the main frame. Remove the five screws as shown in above figure to make the monitor apart from the frame by gently pulling the monitor out of the frame. Turn the monitor back over and gently slide the monitor back onto the frame. Ensure that the monitor is locked in place.
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...