Label; Shipping, Packaging And Storage - HPM Tourniquet 800-20 Manual

1.10
1
2
3
11
10
4
All labels on this equipment are supposed to be cleaned with soap water.
1.11
Transport inspection:
Check the delivery immediately for completeness and any damage during shipping.
For obvious transport damage, do the following:
 Do not accept the delivery or accept it only conditionally.
 Note the scope of damage on the shipping documents or on the shipping delivery note.
 File a complaint
In order to prevent shipping damages to the greatest extent possible, when returning a product to
Hammarplast Medical or a local representative, use the original packaging. Provide the following
information: Owner´s name and address, serial number (see model plate), a description of the
damage.
Packaging notes:
Packaging is commensurate with expected shipping conditions. Only environmentally safe
materials are used for packaging.
The packaging is intended to protect individual components from shipping damage until
installation is complete. Therefore, do not destroy the packaging and only remove it immediately
prior to installation.

Label

7
9

Shipping, packaging and storage

IFU EN T800, Rev 09/2016-07-07, art.no. 8004007
1. Operating voltage in Volts (100-
240V ~50/60Hz)
2. Class 1
3. Manufactured by
4. Contains electrical components,
plastic parts and battery. Return the
instrument to the manufacturer or
dispose it in accordance with legal
regulations and local ordinances.
5. ON/Stand-by. The yellow light is on
when AC power is connected and
6
the battery stand-by charges.
6. 1/0. 1 indicates that the battery
stand-by charges and the unit is
active and ready to use. 0 indicates
that the unit is in stand-by, and the
5
battery stand-by charges.
7. CE-marking
8. Protective ground conductor.
8
9. Read instructions before use.
10. Certified to U.S and Canadian
standards
11. Year of manufacture.
5