Settings; Service; Date & Time; Volume - HPM Tourniquet 800-20 Manual

3.1.6 Settings

By pressing (settings icon) you will enter default settings menu.
 Default timer. Press to set default timer.
 Default Pset. Press to set default pressure (mmHg) in steps of 5 mmHg or use the slider
and confirm with "OK".
 Restore default. Press to get factory settings and confirm by pressing "Save".
Use the "Save" icon to confirm new default settings. Use the "Cancel" icon to abort and return
to sub menu.

3.1.7 Service

By pressing (service icon) you will enter service menu. Enter menu with service code, for
authorized staff only.
Press "Cancel" to return to sub menu or wait 30 seconds and the main menu will return
automatically.
3.1.8 Date & Time
By pressing (Date & Time icon) you will enter the page where you are able to program the
tourniquet internal clock.
Date are constructed according to YY-MM-DD and the clock according to HH:MM:SS.
Use the numeric display starting with YY(year) until you finished with SS (seconds). Press OK.

3.1.9 Volume

By pressing (volume icon) the volume menu will appear. Change level of volume by
pressing the "+" or "–" key. Five different levels of volume are possible to set and store. When
restarting the Tourniquet volume level will be minimum medium.
1-5 stacks, next to the speaker icon, indicate the volume level. To save chosen level press
"Confirm" and you will return to the main menu.
To abort press "Cancel" and you will return to main menu.
The sound volume is demonstrated during the diagnostic test that is done as a part of the initial
procedure.
The sound settings can be changed before or during procedure.
3.2

Pset

Figures in the Pset box shows the pre-setting of the pressure (e.g. 200 mmHg) in the inflated
cuff(s). Inflated cuff(s) can be adjusted in steps of plus (+) or minus (-) 5 mmHg by pressing the
IFU EN T800, Rev 09/2016-07-07, art.no. 8004007
12