Table of Contents
Advertisement
1.2
User Manual
This user manual contains important information for operating the Hpm™ Tourniquet 800
series. Before use of the tourniquet the user manual must be read carefully. The user manual
should be treated as a part of the equipment and must therefore be available during use of the
tourniquet, it is a support and reference for the clinical staff.
If the unit is moved to another operating room, the user manual has to follow the tourniquet.
The user manual illustrations are in order to simplify, understand and manage the equipment.
The illustrations are not always in proper scale and can vary from the actual equipment.
or "Warning" or combinations of both denotes instruction regarding safe use of the
instrument.
1.3
Manufacturer
Hammarplast Medical AB
Kartåsgatan 8, SE-531 40 Lidköping
P.O. Box 2069, SE-531 02 Lidköping
Sweden
Web:
www.hpm.se
Email:
info@hpm.se
Service:
service@hpm.se
Tel.: +46 (0)510 – 618 80
Fax: +46 (0)510 – 655 80
1.4
Warranty
Thank you for purchasing this quality product from Hammarplast Medical AB. Our products are
developed to meet high standards in both quality and technology. To further ensure quality, we
grant you, the final customer, a warranty on our products in accordance with the following
conditions.
The Hammarplast Medical AB product is warranted for the period of twenty-four (24) months
from the original date of purchase, against defective materials and workmanship. In the event
that warranty service is required, you should return the product to the dealer from whom it was
purchased. In case of difficulty, details of the local dealers are available at www.hpm.se. You may
also contact the service center in Sweden (email: service@hpm.se).
International warranty conditions
1. The warranty is only valid if, when warranty service is required, the warranty demand is
presented with the original invoice or sales slip or confirmation, and the serial number on
the product has not been defaced.
2. Hamarplast Medicals obligations are limited to the repair or, at its discretion, replacement
of the product or the defective part. For this, the customer is responsible for the dispatch
and insurance of the product. The transport and insurance costs shall be borne by the
customer. Hammaplast Medical shall cover the costs for the materials/spare parts and the
labor costs as required, as well as the return postage to the sender.
3. In case of warranty repairs, they must be carried out by authorized Hammarplast Medical
AB dealers. No re-imbursement will be made for repairs carried out by non-Hammarplast
Medical representative and, any such repair work and damage to the products caused by
such repair work will not be covered by this warranty.
IFU EN T800, Rev 09/2016-07-07, art.no. 8004007
2
Advertisement
Table of Contents
