Timer Program For Circulation Pump Activation - Weishaupt WRSol 1.0 Manual

6

6.6 Timer program for circulation pump activation

Timer
program
Circ.
Use:
Release of circulation pump depending on the time
program set ( Ch. 5.5)
Changing, adding or deleting switch
Change
times.
A maximum 7 daily programs with up to
daily
3 cycles each can be programmed.
circ.
program
Assign daily programs to the weekdays
Assign
on which they are to be carried out.
daily
circ.
program
Interrogation of daily programs assigned
Display
to the weekdays including the relevant
switch cycles.
daily
circ.
program
Factory presetting timer program circulation pump
Mon Tues Wed
70
Weekday
Thurs Fri Sat
esc
Variation: 1, 2, 4...7, 9, 17...19, 21, 52...56, 60, 61
Variation: 1, 2, 4...7, 9, 17...19, 21, 52...56, 60, 61
Note: Only one daily program with a maximum of 3
cycles can be assigned to each weekday.
Variation: 1, 2, 4...7, 9, 17...19, 21, 52...56, 60, 61
Daily
program
Sun
I = On
1
0 = Off
Change daily circ. program
Assign daily circ. program
Display daily circ. program
Cycle
Z1 Z2
06:00 11:00 17:00
06:30 11:30 17:30
Z3