Imprinter/Addon Settings - Canon DR-5060F Instructions Manual

Imprinter/Addon Settings

When the imprinter/addon function is used, any characters and counters can be
printed/added on the scanned document and image.
The character strings to be printed or added by the imprinter/addon function and
their printing conditions are set in the Imprinter/Addon Settings dialog box.
Text
Enter all single-byte characters for text to be printed/added on. The following
characters and symbols can be entered:
• Numbers (0 to 9)
• Alphabet characters (upper-case, lower-case)
• Space (blank)
• Symbols
The following symbols are added on as they are:
! " # $ % & ' ( ) * + – . / : ; < = > ? @^ _ | { }
Enter the symbol to add on after "\".
• Special characters
Counters, date, time and arrows can be specified as special characters. For
details on how to enter special characters, refer to the description on the
following page.
MEMO
The maximum number of characters that you can enter is 32. Limit the text
to be actually printed/added on to 32 characters including spaces.
If the text you have entered contains special characters such as counters or
the date, a parameter error will occur as the text to be actually printed or
added will exceed 32 characters even if the entered text is within 32
characters.
70
Setting Scan Conditions
~
` ,