Using Patch Codes/Function Sheets - Canon DR-5060F Instructions Manual

Using Patch Codes/Function Sheets

The following functions are supported when the optional patch code/function
sheet detector is attached on the scanner. For details on the optional patch code/
function sheet detector, refer to the Instructions packaged with the optional patch
code/function sheet detector.
Automatic File Separation by Patch Code Sheets
Insert the patch code sheet in between original pages. Files can be automatically
separated when this patch code sheet is detected. There are two types of patch
code sheets: FILE A and FILE B, each with different separation functions. Use the
patch code sheet to suit your specific requirements.
• FILE A
• FILE B
MEMO
Copy the patch code sheet onto paper of the same size as the original
before use.
When using the patch code sheet, insert the copy of the patch code sheet in
front of the sheet at which the file is to be separated.
(Example of how to use
patch code sheet)
When the scanner is used in the Backup mode, the content of the patch
code sheet is photographed to film.
This sheet separates original pages into separate
files from the next page.
This sheet separates original pages into separate
files from this page. This sheet is recorded as an
image even if recording as an image has been set to
disabled.
Insert the copy of the patch code
sheet in front of the sheet at which
the file is to be separated.
Other Scan Operations
2
47