2.5.1 Connecting High Ac/Dc Power - Siemens SIMATIC NET RUGGEDCOM RS940GF Installation Manual

Rugged
Table of Contents

Advertisement

Installing the Device
2.5.1 Connecting High AC/DC Power
2.5.1
Connecting High AC/DC Power
To connect a high AC/DC power supply to the device, do the following:
Electrical hazard – risk of damage to equipment
Do not connect AC power cables to terminals for DC power. Damage to the power
supply may occur.
Electrical hazard – risk of damage to equipment
Before testing the dielectric strength (HIPOT) in the field, remove the braided
ground cable connected to the surge ground terminal and chassis ground. This cable
connects transient suppression circuitry to chassis ground and must be removed in
order to avoid damage to transient suppression circuitry during testing.
14
NOTICE
NOTICE
RUGGEDCOM RS940GF
Installation Manual, 01/2021, C79000-G8976-1356-04

Advertisement

Table of Contents
loading

Table of Contents