Table of Contents
Advertisement
Changing the SEA-4500 Mouthpiece
1. Mount SEA-4500 cylinder in user
preferred position.
2. Remove the black clamp with side
cutters and discard (Fig. 9).
3. Rotate the mouthpiece to preferred
position (Fig. 10).
4. Install a new black clamp with the
clamp tab positioned in-line with the
center of the right bite-tab on the
mouthpiece. Since the mouthpiece is
of a lower profile design than standard
SCUBA-style mouthpieces the clamp
tab should be orientated in this manner
so that the clamp tab does not interfere
with the users lips (Fig. 11).
Figure 9
Figure 10
Figure 11
13
Advertisement
Table of Contents
