Table of Contents
Advertisement
12
Adjusting Mouthpiece Position
The second stage incorporates a position keying feature that enables the user
to adjust orientation of the second stage body in relation to the mouthpiece. This
unique feature keeps the hose closer to the body and allows for more flexibility
in various cylinder-mounting configurations.
The mouthpiece-to-body default
position is horizontal which allows
the hose to route either to the right
or left of the regulator second stage.
The mouthpiece boss on the body is
hexagonally shaped, which allows the
mouthpiece to rotate to six different
positions (Fig. 8).
WARNING:
before returning regulator to service. Failure to install the clamp
will result in mouthpiece separating from regulator body during
deployment of regulator.
The mouthpiece clamp must always be installed
SEA-4500 User's Manual
Hexagonal Mouthpiece Boss
Hexagonal Mouthpiece
Figure 8
Advertisement
Table of Contents
