Replacement Parts List - Panasonic SA-AK58 Service Manual

I/O
Pin Terminal
No. Name
16 D4- O Motor driver 4 output terminal (-)
17 D4+ O Motor driver 4 output terminal
(+)
18 NC - Not used
19 PGND2 - Driver GND terminal 2
20 PV I Driver power supply terminal 2
2
CC
21 I Power supply terminal
V
CC
22 VREF I Reference voltage input terminal
23 IN4 I Motor driver 4 input
24 IN3 I Motor driver 3 input
25 RSTIN I
Reset terminal
(Not used, connected to GND)
26 NC - Not used, connected to GND

21. Replacement Parts List

Notes:
- Important safety notice : / Component identified
special characteristics important safety. / Furthermore, special
parts which have purposes of fire-retardant (resistors), hight-
quality sound (capacitors), low-noise (resistors), etc. are used. /
When replacing any of components, be sure to use only
manufactures specified parts shown in the parts list.
- The <ODSD> mark in Remarks indicates source of supply.
- The marking (RTL) indicates thet Retention Time is Limited for this
item. After the discontinuation of this assembly in production, the
item will continue to be available for a specific period of item. The
retention period of availability is dependent on the type of
assembly, and in accordance with the laws governing part and
product retention. After the end of this period, the assembly will
on longer be available.
- [M] indicates in the remarks columns indicates parts supplied by
MESA.
Function
73
mark have