Panasonic SA-AK58 Service Manual page 62

1. Set the unit to "AUX" position.
2. Insert the Normal blank tape (QZZCRA) into DECK2 and set the
unit to "REC" mode (use " REC/STOP" key).
3. Measure and make sure that the output is within the standard
value.
4. Insert the CrO2 tape (QZZCRX).
5. Repeat step 2 and 3. / Standard value (Normal) : more than 100mV
/ Standard value (CrO2) : more than 150mV
13.2.7. Adjustment Point
14. Illustration of ICs, Transistors and Diodes
15. Schematic Diagram
15.1. Schematic Diagram Notes
- This schematic diagram may be modified at any time with the
development of new technology.
Notes:
Fig.13
Fig.14
62