When replacing any of components, be sure to use only
manufacturers specified parts shown in the parts list.
- Caution! / IC and LSI are sensitive to static electricity. / Secondary
trouble can be prevented by taking care during repair. / Ground
the soldering iron. / Put a conductive mat on the work table. / Do
not touch the legs of IC or LSI with the fingers directly.
- *L10 - L20 are printed coils formed on the P.C.B. and thus not
found in the Replacement Parts list.
- Voltage and signal line /
Negative voltage line /
line /
: FM OSC signal line /
AM OSC signal line /
Tape recording signal line /
: Surround SP. drive signal line
15.2. Schematic Diagram
16. Printed Circuit Board Diagram
17. Block Diagram
18. Troubleshooting Guide
19. Wiring Connection Diagram
20. Terminal Function of ICs
20.1. IC600 (M38199MF229F): / System Control and FL Driver
: Positive voltage line /
: CD signal line /
: AM signal line /
: Tape playback signal line /
: Center SP. drive signal line /
65
:
: FM signal
: