Summary of Contents for Triton CHR P-7039 88400003
Page 1
Fixed riser rail kit Installation and operating instructions nstallers please note these InstructIons are to be left wIth the user 88400003 CHR P-7039 2180706H - September 2016...
Page 2
FITTING MAIN COMPONENTS Ref. Description Fig.1 Rigid riser rail pipe Handset holder Fixed spray arm Arm mounting plate Collar & outlet assembly...
Page 3
FITTING FITTING THE RISER PIPE/FIXED HEAD Fig.2 • Mark the centre hole for the fixed head mounting bracket at a height of 1040mm Bracket (approx) from the inlet datum (fig.2). mounting point Note: The elongated hole in the mounting bracket allows for a small amount of adjustment. •...
Page 4
FITTING Fig.3 WARNING! Check there are no hidden cables or pipes before dri lling holes for wall plugs. Use great care when using power tools near water. The use of a residual current device (RCD) is recommended. • Secure the arm mounting plate to the wall (fig.3).
Page 5
FITTING *Fitting the fixed showerhead (not supplied) Fig.6 • Screw the fixed head (fig.7) to the fixed spray arm. Make sure the sealing washer is in place and screw tight to seal the joint. *Fitting the hose and handset (not supplied) •...
Page 7
DIMENSIONS FITTING 361mm 75-90mm 65mm G1/2B ø20.6mm Illustration not to scale. All dimensions listed in this fitting book regarding the product and installation are approximate.
Page 8
FITTING Please refer to shower installation and operating instructions for service details.
Need help?
Do you have a question about the CHR P-7039 88400003 and is the answer not in the manual?
Questions and answers