Ricoh Pro TF6251 Operating Instructions Manual page 42

3. Basic Operations
1
1. Roll shaft of feeding unit
5. Discharge air of the roll shaft by pressing the protrusion on the roll shaft of the feeding
unit.
Press the protrusion until all air is removed.
Use a hard object such as a metal rod to press the protrusion. Be careful not to injure yourself.
1. Protrusion on the roll shaft of the feeding unit
6. Insert the roll shaft of the feeding unit into the roll media.
The direction that the media is installed on the roll shaft of the feeding unit differs depending on
whether the printing surface is on the inside or outside of the roll media (The roll shaft gear of the
feeding unit should be on the right side).
40
1
M563IC0006
1
M563IC0007